收藏本站
Connectivity....for
Business-Critical Continuity
Type N Connectors
Type N Bulkhead Jack Solder Style for Semi-Rigid Cable
1. Identify connector parts (8 piece parts) and tools (4 piece parts).
2. Strip cable jacket and dielectric to dimension shown. Do not nick
center conductor. Clean all debris from cable.
3. Slide stem over cable jacket, keeping stem correctly oriented to end
of cable.
4. Insert jack contact into rear insulator. Make sure insulator is
correctly oriented to contact. Place jack contact and rear insulator
onto center conductor, keeping insulator correctly oriented between
cable jacket and contact.
5. Slide stem away from jack contact. Insert contact into stop screw
and clamp cable in vise. Tighten stop screw until light pressure is
applied between jack contact, rear insulator and cable jacket.
6. Solder jack contact to center conductor through solder hole using
.020 (.051) diameter flux core solder wire. Use a minimum amount of
solder for a good joint.
7. After solder joint has cooled, remove cable from vise and remove
any excess solder from jack contact with a sharp blade and clean
all debris from contact and rear insulator.
8. Slide stem over rear insulator and tighten stem into location fixture
until stem bottoms out.
9. Insert cable into vise, but do not clamp. Insert jack contact into stop
screw and tighten location fixture until stop screw bottoms out.
Clamp cable in vise.
10. Solder stem to cable jacket, using a minimum amount of solder for a
full fillet joint. Allow assembly to cool before removing from vise.
11. After solder joint has cooled, un-clamp cable and remove location
fixture from stop screw and cable assembly. Insert front insulator
into bulkhead jack body. Insert cable assembly into body and tighten
to 25-30 in-lbs.
12. Add gasket, lock washer and mounting nut when installing
connector to panel.
21
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
1393672-5 CONN PLUG CRIMP R/A 75OHM
1393757-7 CONN MMCX JACK RECEPT RT ANG SMD
1394081-1 CONN PLUG HSING SKT 31POS CRIMP
1394089-1 STRAIN RELIEF 1.5MM/2.5MM 31POS
1394132-1 CAVITY PLUG 2.5MM SYST DIA 3.6MM
1394277-1 COVER 90DEG PIN 4-7POS BLK
14-142 CONN BARRIER BLOCK .563" 14 CIRC
14004-11 TERMINAL BLOCK ENCLOSED 90A 600V
相关代理商/技术参数
13849245 功能描述:汽车连接器 USB ASM COVER FRT RoHS:否 制造商:Amphenol SINE Systems 产品:Contacts 系列:ATP 位置数量: 型式:Female 安装风格: 端接类型: 触点电镀:Nickel
13849267 制造商:Delphi Corporation 功能描述:MOUNT SCREW PAN HD TORX
13849745 功能描述:汽车连接器 TERM F 0.50 SN SEALED RoHS:否 制造商:Amphenol SINE Systems 产品:Contacts 系列:ATP 位置数量: 型式:Female 安装风格: 端接类型: 触点电镀:Nickel
13849747 制造商:Delphi Corporation 功能描述:CONN 2 M PWR PACK 1000 BLK SLD
13849747-B 功能描述:汽车连接器 2W PP SLD M CON BLACK RoHS:否 制造商:Amphenol SINE Systems 产品:Contacts 系列:ATP 位置数量: 型式:Female 安装风格: 端接类型: 触点电镀:Nickel
13849749 制造商:Delphi Corporation 功能描述:CONN 2 M PWR PACK 1000 BLK SLD
13849756 制造商:Delphi Corporation 功能描述:Automotive Connectors 2W PWR PCK SLD F CON BLACK ASSY
13849756-B 功能描述:汽车连接器 2W PP SLD F CON BLACK RoHS:否 制造商:Amphenol SINE Systems 产品:Contacts 系列:ATP 位置数量: 型式:Female 安装风格: 端接类型: 触点电镀:Nickel